Sunwave-tech SRC-7000 User Manual Page 74
- Page / 75
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
72
Appendix C
Troubleshooting Tables
Problem Solution
LCD does not show
anything when you touch it.
• Batteries may be dead.
• Replace the batteries with three new AAA Alkaline batteries.
• Check the batteries are properly insert with the + - indications.
• Reset the SRC-7000 by press the reset switch. (P.9 o.)
The SRC-7000 doesn’t
operate a device.
• Make sure that the desired device on the SRC-7000 LCD panel
has been selected.
• Move SRC-7000 closer to the device. The maximum operating
distance is approximately 10 meters (30 feet).
• Ensure that you are aiming the SRC-7000 directly at the device
and there are no obstructions between the SRC-7000 and the
device.
• Ensure that you have correctly used the learning function to
configure the device or the Pre-Programmed Code has been
properly applied.
• Re-teach the malfunctioning key.
• The device has already plugged the power.
You cannot operate a
device even after teaching
the device by using the
learning function.
• Make sure that your SRC-7000 has correctly learned the target
device’s remote control code.
• Delete the device data from the SRC-7000 and carry out the
learning function again.
• Make sure you did not program more than one remote for a
given device.
You see an “error” display
on the LCD screen during
the learning procedure.
• Make sure you hold the target remote’s key till the screen
displays OK or Error on the screen.
• Make sure the two remotes are not too close or too far apart –
keep them about 2~4 inches (5~10 cm) apart, and your device
remote control is aimed directly at the SRC-7000’s learning
eye.
• The batteries are sufficient with both SRC-7000 & the target
remote control.
- SRC-7000 1
- Preface 2
- Table of Contents 3
- 1.1 SRC-7000 Features 7
- 1.2 Unpacking the SRC-7000 7
- 1.3 Battery Installation 8
- 1.3.1 Battery Precautions 9
- 1.5 Identifying Components 10
- 1.5.2 Botton of SRC-7000 11
- 1.5.4 LCD Touch Screen 13
- 1.5.6 Touch Screen Keys 14
- to call up the 15
- Chapter 2 Quick Start 19
- 2.2 Date / Time Setting 20
- 2.3 Device Setting 21
- 4. 5 24
- A. Pre-code 25
- 1. 2. 3 26
- B. Learning 27
- 1. 2 28
- 3 28
- 3.2 Add a Soft Key 29
- 4. 5. 6 30
- 3.3 Adding Text 31
- 4. 5. 6 34
- 1. 2. 3 35
- 3.7 Pre-programmed Code 37
- 3.8 Learning 39
- 1. 2. 3 40
- 3.9 Learn a Cycle Key 42
- 4. 5 43
- 3.11 Create a Macro 44
- 4. a. 5 45
- SRC-7000 User’s Manual 46
- 3.11.2 Timer Macro 47
- B. Delete Your Timer Macro 49
- D. View Your Timer Macro 51
- Chapter 4 Menus 54
- 4.2 Key Layout 58
- 4.3 Code Setting 59
- 4.4 Timer Macro 60
- 4.5 Duplicate 61
- Chapter 5 Install USB Cable 63
- 5.2 Install Upgrade Tools 65
- Appendix A 71
- Specifications 72
- Appendix B 73
- Appendix C 74
- Problem Solution 75
Samsung S22D300FY manuali
Manuali dei proprietari e guide per l'utente per Televisori e monitor Samsung S22D300FY.
We fornisce 1 manuali pdf Samsung S22D300FY per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comments to this Manuals